您的位置: 标准下载 » 协会标准 » ASTM 美国材料与试验协会 »

ASTM F1359-2007 淋浴器喷淋状态下、人体模型身上的防护罩或防护服的耐液体渗透性的测定用标准试验方法

作者:标准资料网 时间:2024-05-15 13:01:06  浏览:8907   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodforLiquidPenetrationResistanceofProtectiveClothingorProtectiveEnsemblesUnderaShowerSprayWhileonaMannequin
【原文标准名称】:淋浴器喷淋状态下、人体模型身上的防护罩或防护服的耐液体渗透性的测定用标准试验方法
【标准号】:ASTMF1359-2007
【标准状态】:现行
【国别】:
【发布日期】:2007
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:F23.30
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:闭塞物;条件;危险化学品;界面;液体;实施规程;防护设备;缝隙;淋浴设备;测试
【英文主题词】:liquidpenetrationresistance;liquidsplashprotectiveclothing;liquidsplashprotectiveensembles;protectiveclothing;protectiveensemble;showerspraytest
【摘要】:1.1Thistestmethodmeasurestheabilityofprotectiveclothingorprotectiveensemblestoresistliquidpenetrationintheformofashowerspraywithsurfactant-treatedwater.1.2Thistestmethodmeasurestheliquidpenetrationresistanceoftheconstructionandconfigurationoftheoverallprotectiveclothingorprotectiveensemble,butespeciallyofseams,closures,andinterfaceswithothercomponentssuchasgloves,boots,hoods,andrespiratoryprotectiveequipment.Itisintendedthatthistestmethodbeusedtoassesstheliquidpenetrationresistanceofprotectiveclothingandprotectiveensemblesasreceivedfromthemanufacturerandworninaccordancewiththeirinstructions.1.3ResistanceofmaterialsusedinprotectiveclothingtopermeationorpenetrationcanbedeterminedinaccordancewithTestMethodsF739andF903,respectively.1.4TheintegrityofvaporprotectiveensemblesismeasuredbyitsabilitytomaintainpositiveinternalpressurewithTestMethodF1052.1.5ThevaluesinSIunitsorinotherunitsshallberegardedseparatelyasstandard.Thevaluesstatedineachsystemmustbeusedindependentlyoftheother,withoutcombiningvaluesinanyway.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
下载地址: 点击此处下载
基本信息
标准名称:起重机用套装式减速器
英文名称:Hollow shaft gearboxes for cranes
中标分类: 机械 >> 通用零部件 >> 联轴器、制动器与变速器
ICS分类: 机械系统和通用件 >> 轴和联轴器 >> 联轴器、离合器、磨擦器
发布部门:全国起重机械标准化技术委员会
发布日期:1999-06-28
实施日期:2000-01-01
首发日期:1900-01-01
作废日期:1900-01-01
归口单位:全国起重机械标准化技术委员会
出版日期:1900-01-01
页数:21 页
批文号:国机管[1999]363号
适用范围

JB/T 8905.4-1999 本标准是起重机用减速器系列标准的一部分,该系列标准包括: JB/T 8905.1 起重机用三支点减速器 JB/T 8905.2 起重机用底座式减速器 JB/T 8905.3 起重机用立式减速器 JB/T 8905.4 理发重机用套装式减速器 本标准规定了起重机用套装式斜齿圆柱齿轮减速器(QJ-T型)的型式,基本参数,尺寸和技术要求。 本标准减速器主要适用于起重机的运行机构,也适用运输、冶金、矿山、化工及轻工等机械设备的传动机构。工作条件应符合下列要求: a)齿轮圆周速度不大于 16m/s; b)高速轴转速不大于 1500r/min; c)工作环境温度为 -40℃~+45℃; d)可正反两向运转。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用零部件 联轴器 制动器与变速器 机械系统和通用件 轴和联轴器 联轴器 离合器 磨擦器
基本信息
标准名称:机床夹具零件及部件 对刀平塞尺
中标分类: 机械 >> 工艺装备 >> 一般卡具
替代情况:调整为JB/T 8032.1-1995
发布日期:1900-01-01
实施日期:1992-01-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:2页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 工艺装备 一般卡具